Dnsmasq is lightweight, easy to configure DNS forwarder and DHCP server. It is designed to provide DNS and, optionally, DHCP, to a small network. It can serve the names of local machines which are not in the global DNS. The DHCP server integrates with the DNS server and allows machines with DHCP-allocated addresses to appear in the DNS with names configured either in each host or in a central configuration file. Dnsmasq supports static and dynamic DHCP leases and BOOTP for network booting of diskless machines.

Dnsmasq is targeted at home networks using NAT and connected to the internet via a modem, cable-modem or ADSL connection but would be a good choice for any small network where low resource use and ease of configuration are important.

In white Russian 0.9 the init script uses nvram by default.

In order to make dnsmasq work exclusively with the config file (`/etc/dnsmasq.conf`) we need to replace the init script (`/etc/init.d/S60dnsmasq`) with the following script:

[ ! -f /tmp/dhcp.leases ] && {
 touch /tmp/dhcp.leases
 }

 dnsmasq -C /etc/dnsmasq.conf

(Note that, according to its manpage, dnsmasq reads `/etc/dnsmasq.conf` anyway.)

Your

/etc/ethers

and

/etc/hosts

files can now be modified through the White Russian web interface. While you'll still need to manually setup your

/etc/dnsmasq.conf

file for things like domains, you can do simple configuration through the web interface.

DNS entries are configured through the

/etc/hosts

file. dnsmasq will pickup these entries and use them when answering DNS queries on your network.

Format:

[IP_address] host_name host_name_short ...

Example:

192.168.1.1 router OpenWrt localhost
192.168.1.2 ubuntu-desktop
192.168.1.3 ubuntu-laptop

By default, dnsmasq comes configured to put your hosts into the

.lan

domain. This is specified in the configuration file as :

# allow /etc/hosts and dhcp lookups via *.lan
local=/lan/
domain=lan

You can change this to whatever you'd like your home domain to be. Also, if you want your hosts to be available via your home domain without having to specify the domain in your

/etc/hosts

file, add the

expand-hosts

directive to your

/etc/dnsmasq.conf

file.

As an example, without

expand-hosts

, you can only reach

router, ubuntu-desktop and ubuntu-laptop

. With

expand-hosts

on, you can reach

router, router.lan, ubuntu-desktop, ubuntu-desktop.lan, etc

. This probably matches what you're looking for anyway.

Without this setting, you'll have to add

.lan

entries to your host file.

• Homepage
• http://thekelleys.org.uk/dnsmasq/doc.html
• Tutorial
• http://www.enterprisenetworkingplanet.com/netos/article.php/3377351
• Tutorial
• http://martybugs.net/wireless/openwrt/dnsmasq.cgi

An initial symptom of this problem is that DNS forwarding doesn't seem to work and a call to

ps -A

reports that dnsmasq isn't running. Check the output of

logread

for information about what happened when dnsmasq tried to run:

logread | grep dnsmasq | less

The problem lies in that the init script for dnsmasq expects the NVRAM variable,

dhcp_start

, to be in an integer format instead of an IP address (which some other firmwares may leave in your NVRAM after an upgrade to OpenWrt). The variable

dhcp_start

defines offset from beginning of your network addresses and variable

dhcp_num

defines how many IP addresses to use in DHCP pool. DHCP pool consists of addresses

NETWORK+dhcp_start..NETWORK+dhcp_start+dhcp_num

(oops, you have got

dhcp_num+1

dynamic addresses .

Example 1: Your network is

192.168.1.0/255.255.255.0

, your starting address is

192.168.1.100

, your ending address is

192.168.1.149

try this:

nvram set dhcp_start=100
nvram set dhcp_num=50
nvram commit
killall -9 dnsmasq ; /etc/init.d/S60dnsmasq

Example 2: Your network is

192.168.10.40/255.255.255.248

, your starting address is

192.168.10.42

, your ending address is

192.168.10.45

try this:

nvram set dhcp_start=2
nvram set dhcp_num=3
nvram commit
killall -9 dnsmasq ; /etc/init.d/S60dnsmasq

NOTE: this appears to be fixed in WHITE RUSSIAN 0.9 (dnsmasq - 2.35-1) since the init script will correct

dhcp_start

entries.

Suppose you have the following:

vlan0     Link encap:Ethernet  HWaddr XX:XX:XX:XX:XX:XX
          inet addr:192.168.1.1    Bcast:192.168.1.255    Mask:255.255.255.0
eth1      Link encap:Ethernet  HWaddr XX:XX:XX:XX:XX:XX
          inet addr:10.75.9.1      Bcast:10.75.9.255      Mask:255.255.255.0

Simply put 2 "dhcp-range" options in your

/etc/dnsmasq.conf

file:

# dhcp-range=[network-id,],[[,],][,]
dhcp-range=lan,192.168.1.101,192.168.1.104,255.255.255.0,24h
dhcp-range=wlan,10.75.9.111,10.75.9.119,255.255.255.0,2h

You can then use the different "network-id" values with "dhcp-option" to customize the options your DHCP server will supply to your wired and wireless DHCP clients.

for example

#set the default route for dhcp clients on the wlan side to 10.10.6.33
dhcp-option=wlan,3,10.10.6.33
#set the dns server for the dhcp clients on the wlan side to 10.10.6.33
dhcp-option=wlan,6,10.10.6.33
#set the default route for dhcp clients on the lan side to 10.10.6.1
dhcp-option=lan,3,10.10.6.1
#set the dns server for the dhcp clients on the lan side to 10.10.6.1
dhcp-option=lan,6,10.10.6.1

There are situations where you want dnsmasq to generate DHCP addresses for only know clients (as defined in

/etc/ethers

). First, set

lan_dhcp_num=0

to indicate that no addresses are to be generated. Then, modify the file

/etc/init.d/S60dnsmasq

to included the lines

        if [ "${num:-150}" = "0" ]; then
                END=static
        fi

after the calls to

ipcalc.sh

. Restart the daemon or reboot.

You will need the following lines in your

/etc/dnsmasq.conf

file: (Adjust IP address if your router is not 192.168.1.1)

dhcp-option=3,192.168.1.1
dhcp-option=6,192.168.1.1

That's it for dnsmasq on the router. The trick is that the DHCP client must send its hostname during the DHCP negotiation. The

dhclient.conf

file, which may be in

/etc/

(debian) or

/etc/dhcp3/

(kubuntu), needs to have a single line uncommented and edited:

send host-name "hostname";

Save the file, then restart the interface. Repeat on all client systems.

You will need the following line in your

/etc/dnsmasq.conf

file: (Adjust IP address if your WINS server is not 192.168.1.2)

dhcp-option=44,192.168.1.2

Now as your machines release and renew DHCP information they will obtain the address of the WINS server automatically.

The following change to your

/etc/dnsmasq.conf

file will allow for automatic configuration of your DHCP clients to use DNS servers other than that of the router.

dhcp-option=6,ipaddress1,ipaddress2

As your machines release and renew their DHCP configuration they will obtain the address of the new DNS servers automatically.

By default, the option

filterwin2k

in dnsmasq is activated, which seems to cause dnsmasq to block any queries for

SRV

records.

SRV

records are not only used by windows computers to find the domaincontroller and such, they are also used by e.g SIP-Phones to find the server responsible for a given domain (

SRV

records are a kind of generalized

MX

records). Therefore, the

filterwin2k

options needs to be disabled (commented out in

/etc/dnsmasq.conf

) in order to let SIP-Phones work that use dnsmasq as their DNS server.

What to do if you already have a DNS server(secondary DNS server) but you want your router(primary DNS server) to resolve some of the DNS queries? Simply do the following:

rm /etc/resolv.conf

That will remove the resolv.conf symlink. Then we will add the ip address of the secondary DNS inside the /etc/resolve.conf file

echo "nameserver 192.168.1.2">/etc/resolv.conf

Replace 192.168.1.2 by the ip of your dns server then reboot or restart the dnsmasq service.

reboot

or

killall dnsmasq
/etc/init.d/S60dnsmasq start

Then you'll need to set up your secondary dns for resolving internet's DNS queries: ssh into your router then:

cat /tmp/resolv.conf.auto

it will give you something like this:

nameserver 212.68.193.110
nameserver 212.68.193.196

Copy the information and then add it to your secondary DNS's /etc/resolv.conf: into your secondary dns do:

rm /etc/resolv.conf
echo "nameserver 212.68.193.110">>/etc/resolv.conf
echo "nameserver 212.68.193.196">>/etc/resolv.conf

Replace 212.68.193.110 and 212.68.193.196 with the IP addresses you have gotten with the cat /tmp/resolv.conf.auto command.